How To Connect Yi Dome Camera

Yi Applied science YHS6021 YI Dome U Camera Pro User Guide

What's in the box

Getting to Know Your Camera

Pairing your Camera

a) Prerequisite

• Ensure that your cell phone is connected to a 2.4 GHz Wi-Fi network.
• Download the YI Home App from the Apple App Shop or Google Play.
• Register a YI Home account or log on to an existing YI business relationship.

b) Installation:

Step 1
Connect the power adapter to an outlet to activate the photographic camera. The camera indicator will flash yellow and you lot volition hear the introductory message "Welcome to YI home", followed by "Waiting to connect". When yous hear "waiting to connect", tap "I heard waiting to connect".
Note: To install a camera that is previously installed on a different network or if you change your password, you lot must reset your camera. Press the reset push button that is located at the bottom of the photographic camera.

Stride two
Log into the YI Home App, you can tap the "+" sign to select your device or browse the photographic camera QR code with your phone.

Step 3
Enter the countersign of the same Wi-Fi network that is connected to your phone, and then apply the YI Dome U Photographic camera Pro to scan the QR lawmaking that volition be generated.

Step iv
Tap "Next Step". You lot will hear "Pairing is successful" so the YI Dome U Photographic camera Pro is fix to use.

c) Pan/Tilt/Zoom (PTZ) Angle

Range of Activity:
Pan 0° – 350°, tilt upward 53°, tilt down 10°.

Zoom
Direct from the livefeed on your YI Dwelling house App

Mounting Your Photographic camera (optional)

Prerequisite:

• Ensure that the camera is facing the desired direction prior to mounting.
• Ensure that the included USB cablevision can accomplish the desired mounting location.

Secure the mount with screws

Step one
Utilize the included screws to install the camera mount on a flat ceiling.

Step 2
Install the camera by twisting and locking it into the mountain base.

Switching Wi-Fi Networks

When you lot demand to switch Wi-Fi networks or update your Wi-Fi password, follow the instructions below:

1. Restore your camera to its default settings by inserting a newspaper clip or reset pin into the camera's Reset Port.
2. Open up the YI Dwelling app on your telephone, and connect the camera to your telephone again. Your videos stored on your MicroSD card will non be afflicted.

Important Safety Guidelines

1. Read these instructions advisedly.
2. Clean simply with a dry cloth.
3. This camera is for indoor utilize merely.
4. Only use the attachments/ accessories specified by the manufacturer.
5. Unplug this appliance during lightning storms or when unused for long periods of time.
6. To get the best usage out of this product, please consistently update to the latest versions of our app and firmware.
7. Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.

Go to: https://www.yitechnology.com/firmware/

Specifications

• Maximum Resolution: 2304 10 1296
• Lens: Wide-Angle
• Audio: Built-in Mic and Speaker
• Photographic Enhancement: 3D Digital Noise Reduction
• Wi-Fi: 802. 11b/g/due north, two.iv Yard Hz
• Alarm Modes: Human Detection, Movement Detection, Face Detection
• Night Vision: IR Cut+ Non-invasive Infrared LEDs
• Support Platforms: Android, iOS, Mac & PC
• Wireless Encryption: WEP/WPA/WPA2
• USB Cable Length: 2 Meters
• Power Supply: DC 5V/1A
• Ability Consumption: 3.5W
• Pan/Tilt: 350° horizontally, tilt upward 53°, tilt downward ten°.
• Storage: MicroSD Bill of fare and YI Deject Storage
• Operating Temperature: 14°F to 122°F (-ten°C to 50°C)

FCC COMPLIANCE Argument

This device complies with role xv of the FCC Rules. Operation is subject area to the following 2 conditions:

1. This device may non cause harmful interference, and
2. this device must accept any interference received, including interference that may crusade undesired operation.

Changes or modifications not expressly canonical by the party responsible for compliance could void the user'due south authorisation to operate the equipment.

The distance betwixt user and products should be no less than 20cm

This equipment has been tested and found to comply with the limits for a Form B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency free energy and, if non installed and used in accordance with the instructions, may crusade harmful interference to radio communications. Nevertheless , there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined past turning the equipment off and on, the user is encouraged to attempt to right the interference by i or more than of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver .
• Connect the equipment into an outlet on a circuit unlike from that to which the receiver is continued.
• Consult the dealer or an experienced radio/ TV technician for help.

IC Warning

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada' s licence-exempt RSS(s). Functioning is discipline to the post-obit two conditions:

1. This device may not crusade interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device

The altitude between user and products should be no less than 20cm

Radio appliance containing digital circuitry which tin function separately from the operation of a transmitter or an associated transmitter, shall comply with ICES-003. In such cases, the labelling requirements of the applicable RSS apply, rather than the labelling requirements in ICES-003. This Form B digital apparatus complies with Canadian ICES-003.

CE

Herebywe: Shanghai Xiaoyi Technology Co., Ltd., declares that the radio equipment: YHS.6021 is in compliance with Directive 2014/53/European union.
Product Type: YHS.6021
Wi-Fi: ii.4GHz ,802.11b/thou/northward
Max RF ability: 17dBm
Industry: Shanghai Xiaoyi Technology Co., Ltd.
Address: Building 18, Lane 55, Chuanhe Road, China(Shanghai) Airplane pilot Free Trade
Zone, Shanghai, China, 201203
The full text of the European union declaration of conformity is available at the following internet address: https://kamistore.eu/pages/product-certification
Operating Temperature for AC/DC Adapter is -10℃~40℃
Operating Temperature for Camera is -x℃~50℃

FCC ID: 2AFIB-YHS6021
IC: 20436-YHS6021

Manufacture: Shanghai Xiaoyi Engineering science Co.,Ltd.
Address: Building 18, Lane 55, Chuanhe Road, China(Shanghai) Pilot Free
Trade Zone, Shanghai, Mainland china, 201203

Documents / Resources

References

Source: https://manuals.plus/yi-technology/yhs6021-yi-dome-u-camera-pro-manual

Posted by: boyerwalach84.blogspot.com

Share this post